Who needs toilet smells in the bathroom and cloakroom?

Now you can eliminate
them at source (with any back-to-wall or wall-hung toilet) using our new Happy Air extraction system. It draws air through the same flush pipe that flushes water directly into the bowl preventing the bad smells escaping into the room! Unfortunately, Happy Air cannot be attached to an existing toilet as the cistern has to be replaced and ventilation pipes accommodated, so it is more suited to new installations. The slimline Happy Air cistern is only 80mm deep and its overall height is 1150mm. The motor is mounted above the toilet and has an extractor box which also draws air from the room. This helps remove any smells that may escape inadvertently and aids the ambiance of the room. The extractor will move up to 101m3 of air every hour.

There are three types of Happy Air cisterns as described below:

Model A
Mainly for use with back-to-wall pans. It can also be used with wall-hung if the pan has a fixing frame.

Model B
For use with wall-hung pans.where the cistern is fitted inside a brick/block wall and fixing for the pan is required.

Model C
For use with wall-hung pans where fixing is required.

'Happy Air' is manufactured by Oliver International, part of the Fondital Group of companies.

Go to top of page